Tax included.
Professionelle Keramikversiegelung für Lack, Folie, Felgen & Kunststoff – entwickelt für maximalen Glanz, starke Hydrophobie und langanhaltenden Schutz inkl. professionellem Zubehör
Lieferumfang: Keramikversiegelung, 500ml Degreaser, 10x 300gsm Mikrofasertuch, 4x Appliaktionssponge Small. ** Standzeit abhängig von Vorbereitung, Pflege & Umwelteinflüssen. *** Leichte Verarbeitung im Vergleich zu anderen Produkten der Kategorie – Hinweise siehe Anleitung.
Keramikversiegelung, 500ml Degreaser, 10x 300gsm Mikrofasertuch, 4x Appliaktionssponge Small.
Ceramic coating – Produced in Germany
Our FINAL PRO ceramic coating delivers uncompromising performance: extreme hydrophobicity, intense depth of gloss and impressive slickness – combined with stable, reliable durability.
Produced in Germany, free from PTFE & PFAS and compliant with all EU regulations – for maximum product safety and predictable results in daily use.
✔ Long durability, strong performance
✔ Extreme water & dirt repellency
✔ Developed for demanding users yet easy to apply.
A true professional-grade ceramic coating – made for detailers who have to deliver results.
Available sizes: 50 ml & 100 ml | Product comes without applicators!
Application
Prepare the paint surface as usual (wash, polish, etc.) and then thoroughly degrease with “Ultra Degreaser”.
Apply a small amount of FINAL PRO to a suitable coating applicator and spread evenly.
After approx. 3–5 minutes, buff off with a soft 300 gsm microfiber towel without pressure.
Note:
The final surface slickness develops during the curing phase within the first few hours after application and can take up to 24 hours.
Inspection:
Check coated areas from different light angles. High spots can be removed by lightly wiping for up to 10 minutes after application.
Curing time (at approx. 20 °C, climate-related deviations possible):
24 hours – water-resistant & ready to drive
5 days – fully cured, wash-safe & fully loadable
❗ You’ll find a more detailed instruction guide further down on this page ⬇️
1️⃣ Who can apply Final Pro?
✅ Professionals & ambitious enthusiasts with basic knowledge of professional car detailing
----------
2️⃣ Which surfaces can I use the ceramic coating on?
ATTENTION: The following information assumes correct application!
✅ All common automotive paints – (gloss & matte)
✅ All painted wheel types
✅ Wrapped vehicles
✅ Virtually all common plastics – provides protection & color enhancement.
❌ Not recommended for (soft) rubber such as seals
❌ Not recommended for glass – for this we recommend our dedicated “Glass Coat”
💡 Always test on an inconspicuous area first!
----------
3️⃣ How do I need to prepare the paint?
Bullet-point checklist:
✅ Perform a thorough hand wash
✅ Paint decontamination:
Remove iron fallout, tar, etc. with a clay bar or clay pad to eliminate embedded contaminants.
✅ Polishing:
If the paint has holograms, scratches or swirls, it must be polished beforehand.
----------
4️⃣ What environmental conditions do I need?
✅ Temperature range: Ideally 15–25°C to ensure optimal application & curing.
✅ Humidity 45–70%: Many don’t know this, but the right humidity is crucial for ideal polymerization (curing)! 💡 You can often get a hygrometer to measure humidity for just a few euros.
✅ Dust-free, clean environment: A garage or workshop is ideal.
✅ Good lighting: LED spots or strong workshop lamps help you spot high spots (streaks) immediately.
✅ Dry & weather-protected: After application, the car must not get wet for at least 12 hours.
Developed and designed for anyone wanting to work with a ceramic coating that meets the highest standards while being easy to apply. Give vehicles the shine & protection they deserve—at a highly professional level.
FINAL PRO not only guarantees you tested and safe ingredients, but also maximum performance—from surface smoothness and intense gloss to impressive hydrophobicity (water beading).
Developed and designed for anyone wanting to work with a ceramic coating that meets the highest standards while being easy to apply. Give vehicles the shine & protection they deserve—at a highly professional level.
FINAL PRO not only guarantees you tested and safe ingredients, but also maximum performance—from surface smoothness and intense gloss to impressive hydrophobicity (water beading).
Our Final Pro ceramic sealant is developed, manufactured, and tested in Germany. The sealant complies with all current regulations & at the same time offersmaximum performance without compromise.
To emphasize this, we even had a DEKRA-accredited testing laboratory conduct several quality tests – with successful certification in multiple classifications.
Certification in various classifications, see:DEKRA Laboratory Test Report
Our Final Pro ceramic sealant is developed, manufactured, and tested in Germany. The sealant complies with all current regulations & at the same time offersmaximum performance without compromise.
To emphasize this, we even had a DEKRA-accredited testing laboratory conduct several quality tests – with successful certification in multiple classifications.
Certification in various classifications, see:DEKRA Laboratory Test Report
Step-by-step guide to the required process.
If you’re not 100% confident handling the necessary products, always consult a professional.
Notes
Familiarize yourself with the safety instructions. Read the enclosed manual carefully. Choose a well-ventilated, well-lit, dry & clean area. Never apply on hot surfaces or in direct sunlight. Application temperature +15 to +25°C
Before starting the coating process, a compatibility test on an inconspicuous area of the surface is absolutely necessary!
Preparation
Prepare the paint surfaces to be sealed according to standard sealing prep. Clean, decontaminate (clay), polish. Then degrease the surfaces with the “Ultra Degreaser”.
In general, preparation determines the outcome. Only a perfectly prepped surface provides the right foundation for the sealant to adhere and perform optimally.
Application
A small amount of "Final PRO" should be placed in the coating applicator and spread over the paint surface.
(Start with areas of approximately 60cmx60cm to get a feel for the processing.)
The "Final PRO" should be "polished out" after about 3-5 minutes using our soft 300gsm microfiber cloths (without applying pressure).
Attention!The final surface smoothness only develops at the beginning of the drying phase, in the first hours after coating; this process can take up to 24 hours!
control
Check the coated surfaces from different light angles for possible “high-spots” (visible coating residue). You can remove these up to 10 minutes after application by gently wiping with the microfiber cloth.
Drying phase (at approx. 68°F/20°C)
(Times may vary depending on climate!)
24 hours = Water resistant/ready to drive*
5 days = Fully cured/vehicle can be fully used and washed.
✅Professionals & Ambitious Enthusiastswith good basic knowledge in professional vehicle care
WARNING: The following information requires correct processing!
✅All common automotive paints– (glossy & matte)
✅All types of painted rims
✅Wrapped Vehicles
✅Practically all common plastics– provides protection & color refreshment.
❌Not recommended for (soft) rubberlike seals
❌Not recommended for glass– here we recommend our special "Glass Coat"
💡Always test in an inconspicuous spot first!
Bullet Point Table:
✅Thorough hand wash execute
✅Paint decontamination:
Remove flash rust, tar, etc.with aCleaning Clay, to remove deep-seated dirt.
✅Polishing:
If the paintHolograms, scratches or swirlshat, it must be polished beforehand.
At least oneHigh gloss or one-step polishStep should be taken even if the paint is already in seemingly "good" condition.
✅Surface degreasing:
Before sealing, the surface must bea special degreaserlike ourUltra Degreasercleaned.
💡Tip:The sealant only holds as well as the preparation – the better the paint is prepared, the longer the protection lasts. Because only in this way can the sealant bond maximally to the pre-treated surface!
✅Temperature range:Ideal are15–25°C, to ensure optimal processing & curing.
✅Humidity 45-70% :Many people don't know this, but the right humidity is very important for the so-called polymerization (curing) to proceed ideally! 💡 You can often get a hygrometer to measure humidity for just a few euros.
✅Dust-free clean environment:a garage or hall is ideal.
✅Good lighting:LED spotlights or powerful workshop lamps help to immediately identify high spots (streaks).
✅Dry & weatherproof:After use, the car mayat least 12 hoursdo not get wet.
Safe-Shield.
Developed with real experience
We are a German, owner-managed brand, founded and created out of genuine passion for premium car care!
Made in Germany / Active worldwide
Used internationally, but always there for you. On Instagram we take you behind the scenes, share our daily work and stay within reach.
🤝 For professionals & enthusiasts.
Over 1,000 registered business customers on at least 3 continents rely on us!
